X
Cart button for mobile
Home
Products
Product Maintenance
Case Studies
News
About
Contact


0800 80 90 98

Pressure Gauge Fde Compliant

Pressure Gauge Fde Compliant
Previous Next

Pressure Gauge Fde Compliant

Pressure Gauge For Effluent Fde Compliant

Standard pressure gauges do not work well for effluent, they block. The TechniPharm specially developed effluent gauge does not block and is particularly suitable for monitoring effluent system pressures at any point from pump to irrigator. FDE rules stipulate a pressure gauge should be mounted at the pump end and at the last hydrant end to the Irrigator. FDE Guideline on Pressure Variation: The FDE land application system must be designed to apply within +/- 10% of target applied depth with acceptable uniformity and application intensity in any location. In general the total pressure at the applicator(s) should not vary by more than: 20% of the design operating pressure at any point in the system Provision must be made for pressure measurement at the outlets/sprinklers as well as at the pump.

$225.00 NZD + GST
Part No. IRPGA